Model GN-103A Readout Box

1Application

Model GN-103A Readout Box is applicable for reading tiltmeter, horizontal tiltmeter and this instrument can work well under different engineering climate environment. The instrument is able to automatically identify the identification chip of tiltmeter, measure data and automatically convert the physical value. It has Chinese menu, big display screen with backlight, and functions such as: remote control line switch (Remote control line switch for data storage), depth descending of the hole, data comparison, complement measurement, USB port communication, and offline auto power off, etc.

2Technical Specifications and the Structure

2.1 Technical Specifications

¹: without identification function

²: with identification function

2.2   Structure

2.2.1          Dimension: 21 cm ?? 15 cm ?? 9 cm

2.2.2          Net Weight: 1Kg

2.2.3          Constitution

Model GN-103A Readout Box consists of:

a)         Instrument Cabinet;

b)        Cable for connecting;

c)         Communication Cable and Software;

d)        Charger

2.3   Panel

1)        USB Port and Charging Port

2)        Cable connecting plug

3)        Remote control line switch (Remote control line switch for data storage)

4)        Display Screen

5)        Power On (Start) Button

6)        Power Off (Shut) Button

7)        Readout (Read) Button

8)        Enter Button

9)        Navigation Buttons (Left, Right, Up, Down)

10)     Store Button

11)     Backlight Button

2.4   Buttons

a)         Under measuring mode, press ?????? to setup the numbering of holes

b)        Under measuring mode, press ?????? to enter the measuring status for engineering value (without intelligent identification function)

c)         Under measuring mode, press ?????? to enter the measuring status for modulus value (with intelligent identification function)

d)        Under measuring mode, press ??Store?? or remote switch to store current data. The remote switch has 2 seconds anti-misoperation function.

e)         Under measuring mode, press ??Backlight?? to switch on the back light and press again to switch it off.

f)         Before the measurement is started or after the measurement is finished, press ??Menu?? to enter the system menu.

g)        Under any mode, press ??Start?? again to restart the readout instrument.

h)        Under any mode, press ??Shut?? to switch the readout instrument off.

i)          If the transducer is not connected or incorrectly connect, ??----?? will be displayed under measuring mode.